Меню
AI-250
DUAL UNIT HYBRID INTEGRATED AMPLIFIER
In the first unit there is an input switch, a volume control and a tube transformer stage, in the second - a transistor current amplifier
- Driver lamp:
- 6N30PI
- Output power at 4 ohm load:
- 180W
- Sensitivity:
- 2В RMS
- Frequency range (- 3 dB):
- 5 - 60,000 Hz
- Signal-to-noise ratio:
- - 86 dB
- Output resistance:
- 0.15 OHM
- Number of inputs:
- 4 (RCA)
- Remote control:
- input switching, volume, standby mode
- Dimensions of enclosures:
- 430 х 400 х 150 430 х 400 х 1 70
- Weight:
- 28 kg 16 kg
AI-270
TRIPLEX HYBRID INTEGRATED AMPLIFIER
In the first unit there is an input switch, a volume control and a tube transformer stage,
in the second and third - transistor current amplifiers
- Driver lamp:
- 6N30PI
- Output power at load 4 ohm:
- 180W
- Sensitivity:
- 2В RMS
- Frequency range (- 3 dB):
- 5 - 60000 Hz
- Signal-to-noise ratio:
- - 86 dB
- Output resistance:
- 0.15 OHM
- Number of inputs:
- 4 (RCA)
- Remote control:
- Input switching, volume, standby mode
- Dimensions of enclosures:
- 320 х 320 х 200 320 х 300 х 130
- Weight:
- 16 kg 15 kg
LanDAC
Streamer
The output stage uses germanium transistors and a summing transformer with amorphous core
- DAC chip type:
- AD1853
- Input:
- RJ-45
- Supported sampling rates:
- 44.1/48/88.2/96/176.4/192 kHz
- Frequency range (44.1 kHz; - 3 dB):
- 1 - 20000 Hz
- Signal-to-noise ratio:
- - 95 dB
- Output voltage (0 dBF):
- 2,7 В RMS
- Output resistance:
- 90 OHM
- Output:
- 1 RCA; 1 XLR
- Body size:
- 380 х 360 х 130
- Weight:
- 10 kg
PHONO 2
CORRECTION AMPLIFIER FOR MM AND MS HEADS
The amplifier uses LR correction
- Reinforcement for MM head:
- - 46 dB
- MC Head Gain:
- - 66 dB
- Frequency range (- 3 dB):
- 15 - 30000 Hz
- Signal-to-noise ratio:
- - 70 dB
- Body size:
- 380 х 320 х 90
- Weight:
- 9 kg
MAINS CABLES
Electric cables have a patented design. Equipped with a plug and socket at the ends. The cable design provides additional filtering of interference and network interference. This has a positive effect on increasing sound clarity, improves resolution and accuracy in the bass range, and has a greater emotional impact on listeners. Used to connect audio and video equipment to a 230 V, 50 Hz network.
- Power of connected equipment:
- up to 2.5 kW
- Cable length:
- 1.6 m
- S-series:
- standard for entry-level equipment
- M-series:
- average price range
- H-series:
- upper price range
- There are three brands of cables inside each series. Some design differences allow you to choose the best "sound" cable for your set of equipment
Solders
Solder is produced under the import substitution program. Consists of ultra-high-purity components (above the requirements of GOST).
Replaces solder of companies:
| WBT | Asahi | Audio-Note |
| Mundorf | Felder | Wako |
| Cardas | Oyaide | Furutech |
It is used by us for the production of high-quality audio equipment. It has noticeable advantages in sound.
It is recommended not to overheat soldering.